6. Command Class Control

Table of Contents

• 6.1. Command Class Control Overview
  • 6.1.1. Controlled and Supported Command Classes
    • 6.1.1.1. Control via association groups
    • 6.1.1.2. “Full” control
    • 6.1.1.3. Partial Control
  • 6.1.2. Command Classes Support Discovery Requirements
  • 6.1.3. Command Classes Control Requirements
    • 6.1.3.1. Mandatory supporting node interview
    • 6.1.3.2. Minimum end user functionalities
    • 6.1.3.3. Command Class control version
  • 6.1.4. Command Classes not Present in this Document
• 6.2. Application Command Classes
  • 6.2.1. Active Schedule Command Class, version 1
    • 6.2.1.1. Mandatory node interview
    • 6.2.1.2. Target Schedule Data Interview
    • 6.2.1.3. Minimum end user functionalities
      • 6.2.1.3.1. Attach, Modify or Delete a Schedule
      • 6.2.1.3.2. Query the State of a Schedule
      • 6.2.1.3.3. Enable or Disable Schedules for a Target
    • 6.2.1.4. Node properties
    • 6.2.1.5. Supported Target Command Classes
  • 6.2.2. Anti-theft Unlock Command Class, version 1
    • 6.2.2.1. Mandatory node interview
    • 6.2.2.2. Minimum end user functionalities
      • 6.2.2.2.1. Unlock the node
    • 6.2.2.3. Node properties
  • 6.2.3. Barrier Operator Command Class, version 1
    • 6.2.3.1. Mandatory node interview
    • 6.2.3.2. Minimum end user functionalities
      • 6.2.3.2.1. Initiate opening (or stop closing)
      • 6.2.3.2.2. Initiate closing
    • 6.2.3.3. Node properties
    • 6.2.3.4. Additional control requirements
  • 6.2.4. Basic Command Class, version 1-2
    • 6.2.4.1. Mandatory node interview
    • 6.2.4.2. Minimum end user functionalities
      • 6.2.4.2.1. Set the node On/Off state
    • 6.2.4.3. Node properties
    • 6.2.4.4. Additional control requirements
  • 6.2.5. Binary Switch Command Class, version 1-2
    • 6.2.5.1. Mandatory node interview
    • 6.2.5.2. Minimum end user functionalities
      • 6.2.5.2.1. Set the node On/Off state
    • 6.2.5.3. Node properties
  • 6.2.6. Central Scene Command Class, version 1-3
    • 6.2.6.1. Mandatory node interview
    • 6.2.6.2. Minimum end user functionalities
    • 6.2.6.3. Node properties
    • 6.2.6.4. Additional control requirements
  • 6.2.7. Color Switch Command Class, version 1-3
    • 6.2.7.1. Mandatory node interview
    • 6.2.7.2. Minimum end user functionalities
      • 6.2.7.2.1. Set the color
      • 6.2.7.2.2. Fade/enhance a color component
      • 6.2.7.2.3. Stop fading/enhancing a color component
    • 6.2.7.3. Node properties
    • 6.2.7.4. Additional control requirements
  • 6.2.8. Configuration Command Class, version 1-4
    • 6.2.8.1. Mandatory node interview
    • 6.2.8.2. Minimum end user functionalities
      • 6.2.8.2.1. Set a configuration parameter Value
      • 6.2.8.2.2. Reset all configuration parameter values to default
    • 6.2.8.3. Node properties
    • 6.2.8.4. Additional control requirements
  • 6.2.9. Door Lock Command Class, version 1-4
    • 6.2.9.1. Mandatory node interview
    • 6.2.9.2. Minimum end user functionalities
      • 6.2.9.2.1. Configure the door lock
      • 6.2.9.2.2. Set the door mode
    • 6.2.9.3. Node properties
  • 6.2.10. Entry Control Command Class, version 1
    • 6.2.10.1. Mandatory node interview
    • 6.2.10.2. Minimum end user functionalities
      • 6.2.10.2.1. Configure the keypad
    • 6.2.10.3. Node properties
    • 6.2.10.4. Additional control requirements
  • 6.2.11. IR Repeater Command Class, version 1
    • 6.2.11.1. Mandatory node interview
    • 6.2.11.2. Minimum end user functionalities
      • 6.2.11.2.1. Repeat an IR code
      • 6.2.11.2.2. Learn an IR code
      • 6.2.11.2.3. Erase a learnt IR code
      • 6.2.11.2.4. Repeat a learnt IR code
    • 6.2.11.3. Node properties
  • 6.2.12. Meter Command Class, version 1-5
    • 6.2.12.1. Mandatory node interview
    • 6.2.12.2. Minimum end user functionalities
      • 6.2.12.2.1. Reset cumulated data
    • 6.2.12.3. Node properties
    • 6.2.12.4. Additional control requirements
  • 6.2.13. Multilevel Sensor Command Class, version 1-11
    • 6.2.13.1. Mandatory node interview
    • 6.2.13.2. Minimum end user functionalities
    • 6.2.13.3. Node properties
    • 6.2.13.4. Additional control requirements
  • 6.2.14. Multilevel Switch Command Class, version 1-4
    • 6.2.14.1. Mandatory node interview
    • 6.2.14.2. Mimimum End User Functionalities
      • 6.2.14.2.1. Set the Level
    • 6.2.14.3. Node Properties
  • 6.2.15. Notification Command Class, version 1-8
    • 6.2.15.1. Mandatory Node Interview
    • 6.2.15.2. Minimum End User Functionalities
    • 6.2.15.3. Node Properties
    • 6.2.15.4. Additional Control Requirements
      • 6.2.15.4.1. Detailed Controller Guidelines
        • 6.2.15.4.1.1. Sensor database
        • 6.2.15.4.1.2. Push/Pull mode discovery
        • 6.2.15.4.1.3. Unknown Notifications
        • 6.2.15.4.1.4. State idle
        • 6.2.15.4.1.5. Parameter encapsulation
        • 6.2.15.4.1.6. Controlling Pull Mode Sensors
  • 6.2.16. Simple AV Control Command Class, version 1-4
    • 6.2.16.1. Mandatory Node interview
    • 6.2.16.2. Minimum end user functionalities
      • 6.2.16.2.1. Send a supported AV code
    • 6.2.16.3. Node properties
  • 6.2.17. Sound Switch Command Class, version 1
    • 6.2.17.1. Mandatory node interview
    • 6.2.17.2. Minimum end user functionalities
      • 6.2.17.2.1. Configure the sound switch
      • 6.2.17.2.2. Play/stop a selected or default tone
    • 6.2.17.3. Node properties
  • 6.2.18. Thermostat Mode Command Class, version 1-3
    • 6.2.18.1. Mandatory interview
    • 6.2.18.2. Minimum end user functionalities
      • 6.2.18.2.1. Change mode
    • 6.2.18.3. Node properties
  • 6.2.19. Thermostat Setback Command Class, version 1
    • 6.2.19.1. Mandatory interview
    • 6.2.19.2. Minimum end user functionalities
      • 6.2.19.2.1. Configure setback
    • 6.2.19.3. Node properties
  • 6.2.20. Thermostat Setpoint Command Class, version 1-3
    • 6.2.20.1. Mandatory interview
    • 6.2.20.2. Minimum end user functionalities
      • 6.2.20.2.1. Change setpoint for a supported type
    • 6.2.20.3. Node properties
  • 6.2.21. User Code Command Class, version 1-2
    • 6.2.21.1. Mandatory interview
    • 6.2.21.2. Minimum end user functionalities
      • 6.2.21.2.1. Set/modify a User Code
      • 6.2.21.2.2. Erase a User Code
      • 6.2.21.2.3. Set the keypad mode (v2)
      • 6.2.21.2.4. Set the Admin Code (v2)
    • 6.2.21.3. Node properties
    • 6.2.21.4. Additional control requirements
  • 6.2.22. User Credential Command Class, version 1-2
    • 6.2.22.1. User Management Overview
    • 6.2.22.2. Mandatory interview
    • 6.2.22.3. Minimum end user functionalities
      • 6.2.22.3.1. Add/Modify a User
      • 6.2.22.3.2. Delete a User
      • 6.2.22.3.3. Add/Modify a Credential
      • 6.2.22.3.4. Delete a Credential
      • 6.2.22.3.5. Set the Admin PIN Code
      • 6.2.22.3.6. Add/Modify a Key Locker Entry
      • 6.2.22.3.7. Delete a Key Locker Entry
    • 6.2.22.4. Node properties
    • 6.2.22.5. Additional control requirements
  • 6.2.23. Window Covering Command Class, version 1
    • 6.2.23.1. Mandatory interview
    • 6.2.23.2. Minimum end user functionalities
      • 6.2.23.2.1. Go to position
      • 6.2.23.2.2. Start level change up or down
      • 6.2.23.2.3. Stop level change
    • 6.2.23.3. Node properties
    • 6.2.23.4. Additional control requirements
• 6.3. Management Command Classes
  • 6.3.1. Association Command Class, version 1-4
    • 6.3.1.1. Mandatory Node interview
    • 6.3.1.2. Minimum End User functionalities
    • 6.3.1.3. Node properties
    • 6.3.1.4. Additional Control requirements
      • 6.3.1.4.1. Removing associations
  • 6.3.2. Association Group Information (AGI) Command Class, version 1-3
    • 6.3.2.1. Mandatory node interview
    • 6.3.2.2. Minimum end user functionalities
    • 6.3.2.3. Node properties
  • 6.3.3. Battery Command Class, version 1
    • 6.3.3.1. Mandatory node interview
    • 6.3.3.2. Minimum end user functionalities
    • 6.3.3.3. Node properties
    • 6.3.3.4. Additional control requirements
  • 6.3.4. Device Reset Locally Command Class, version 1
    • 6.3.4.1. Mandatory node interview
    • 6.3.4.2. Minimum end user functionalities
    • 6.3.4.3. Node properties
    • 6.3.4.4. Additional control requirements
  • 6.3.5. Firmware Update Meta Data Command Class, version 1-6
    • 6.3.5.1. Mandatory node interview
    • 6.3.5.2. Minimum end user functionalities
      • 6.3.5.2.1. Firmware update
    • 6.3.5.3. Node properties
    • 6.3.5.4. Additional control requirements
  • 6.3.6. Indicator Command Class, version 1-3
    • 6.3.6.1. Mandatory node interview
    • 6.3.6.2. Minimum end user functionalities
      • 6.3.6.2.1. Identify
    • 6.3.6.3. Node properties
    • 6.3.6.4. Additional control requirements
  • 6.3.7. Multi Channel Association Command Class, version 2-5
    • 6.3.7.1. Mandatory node interview
    • 6.3.7.2. Minimum end user functionalities
    • 6.3.7.3. Node properties
    • 6.3.7.4. Additional control requirements
      • 6.3.7.4.1. Removing associations
  • 6.3.8. Time Command Class, version 1-3
    • 6.3.8.1. Mandatory node interview
    • 6.3.8.2. Minimum end user functionalities
    • 6.3.8.3. Node properties
    • 6.3.8.4. Additional control requirements
  • 6.3.9. Version Command Class, version 1-4
    • 6.3.9.1. Mandatory node interview
    • 6.3.9.2. Minimum end user functionalities
    • 6.3.9.3. Node properties
    • 6.3.9.4. Additional control requirements
  • 6.3.10. Wake-Up Command Class, version 1-2
    • 6.3.10.1. Mandatory node interview
    • 6.3.10.2. Minimum end user functionalities
    • 6.3.10.3. Node properties
    • 6.3.10.4. Additional control requirements
• 6.4. Transport-Encapsulation Command Classes
  • 6.4.1. CRC-16 Encapsulation Command Class Control Definitions, version 1
    • 6.4.1.1. Mandatory node interview
    • 6.4.1.2. Minimum end user functionalities
    • 6.4.1.3. Node properties
    • 6.4.1.4. Additional Control Requirements
  • 6.4.2. Multi Channel Command Class, version 3-4
    • 6.4.2.1. Mandatory node interview
    • 6.4.2.2. Minimum end user functionalities
    • 6.4.2.3. Node properties
    • 6.4.2.4. Additional Control Requirements
      • 6.4.2.4.1. Root Device and End Point Command Classes
      • 6.4.2.4.2. S0 only Multi Channel nodes
      • 6.4.2.4.3. Association and Multi Channel Association mapping
  • 6.4.3. Security 0 Command Class
    • 6.4.3.1. Mandatory node interview
    • 6.4.3.2. Minimum end user functionalities
    • 6.4.3.3. Node properties
    • 6.4.3.4. Additional Control Requirements
  • 6.4.4. Security 2 Command Class
    • 6.4.4.1. Mandatory node interview
    • 6.4.4.2. Minimum end user functionalities
    • 6.4.4.3. Node properties
    • 6.4.4.4. Additional Control Requirements
  • 6.4.5. Supervision Command Class, version 1
    • 6.4.5.1. Mandatory node interview
    • 6.4.5.2. Minimum end user functionalities
    • 6.4.5.3. Node properties
    • 6.4.5.4. Additional Control Requirements