8. Role Type Specification

Table of Contents

• 8.1. Introduction
  • 8.1.1. Purpose
• 8.2. Z-Wave Compliance Overview
  • 8.2.1. SIS Assignment
    • 8.2.1.1. Non-SIS capable Primary Controllers
    • 8.2.1.2. SIS capable controllers
    • 8.2.1.3. SIS return route assignment
  • 8.2.2. Network Inclusion and Exclusion
  • 8.2.3. Security bootstrapping
    • 8.2.3.1. Security 0 Command Class
      • 8.2.3.1.1. Upgrading non-secure networks
    • 8.2.3.2. Security 2 Command Class
      • 8.2.3.2.1. Bootstrapping capabilities
      • 8.2.3.2.2. Granting Security Classes
      • 8.2.3.2.3. Informing the user about security
  • 8.2.4. Device Reset Locally support
  • 8.2.5. Node interview and response timeouts
  • 8.2.6. Polling Devices
    • 8.2.6.1. Polling with no errors
    • 8.2.6.2. Polling with transmit error
    • 8.2.6.3. Polling with missing Report Frame
  • 8.2.7. Unsolicited communication
    • 8.2.7.1. Unsolicited data collection communication
    • 8.2.7.2. Unsolicited control communication
  • 8.2.8. Runtime communication
    • 8.2.8.1. Routing
    • 8.2.8.2. Wake-Up communication timeout protection
  • 8.2.9. Network maintenance
  • 8.2.10. SmartStart requirements
    • 8.2.10.1. Support requirements
      • 8.2.10.1.1. SmartStart learn mode activation
      • 8.2.10.1.2. Higher Inclusion Request Interval
    • 8.2.10.2. Control requirements
      • 8.2.10.2.1. Command Class support
      • 8.2.10.2.2. User interface
      • 8.2.10.2.3. QR Code scanning capability
• 8.3. Role Type Overview
  • 8.3.1. Detecting the Role Type of a device
• 8.4. Role Type Definitions
  • 8.4.1. Central Static Controller (CSC)
    • 8.4.1.1. CSC Protocol Requirements
      • 8.4.1.1.1. If first node in the network
    • 8.4.1.2. CSC setup
      • 8.4.1.2.1. Inclusion process
      • 8.4.1.2.2. Lifeline configuration
      • 8.4.1.2.3. CSC including a SSC, PC, RPC or NAEN
      • 8.4.1.2.4. CSC including a PEN, LSEN, RSEN or WOEEN
      • 8.4.1.2.5. CSC including an AOEN
      • 8.4.1.2.6. CSC including another CSC
      • 8.4.1.2.7. CSC included by a PC, RPC, SSC
    • 8.4.1.3. CSC Runtime Configuration
    • 8.4.1.4. CSC Runtime Communication
  • 8.4.2. Sub Static Controller (SSC)
    • 8.4.2.1. SSC Protocol Requirements
      • 8.4.2.1.1. If first node in the network
    • 8.4.2.2. SSC Setup
      • 8.4.2.2.1. Inclusion process
      • 8.4.2.2.2. Lifeline configuration
      • 8.4.2.2.3. SSC including a CSC
      • 8.4.2.2.4. SSC including an RPC, PEN, RSEN or WOEEN
      • 8.4.2.2.5. SSC including an SSC, PC, AOEN, LSEN, or NAEN
    • 8.4.2.3. SSC Runtime Configuration
    • 8.4.2.4. SSC Runtime communication
  • 8.4.3. Portable Controller (PC)
    • 8.4.3.1. PC Protocol Requirements
      • 8.4.3.1.1. If first node in the network
    • 8.4.3.2. PC Setup
      • 8.4.3.2.1. Inclusion process
      • 8.4.3.2.2. Lifeline configuration
      • 8.4.3.2.3. PC including a CSC
      • 8.4.3.2.4. PC including an RPC, PEN, RSEN or WOEEN
      • 8.4.3.2.5. PC including an SSC, PC, AOEN, LSEN or NAEN
    • 8.4.3.3. PC Runtime Configuration
    • 8.4.3.4. PC Runtime communication
  • 8.4.4. Reporting Portable Controller (RPC)
    • 8.4.4.1. RPC protocol requirements
      • 8.4.4.1.1. If first node in the network
    • 8.4.4.2. RPC Setup
      • 8.4.4.2.1. Inclusion process
      • 8.4.4.2.2. Lifeline configuration
      • 8.4.4.2.3. RPC including a CSC
      • 8.4.4.2.4. RPC including an RPC, PEN, RSEN or WOEEN
      • 8.4.4.2.5. RPC including an SSC, PC, AOEN, LSEN or NAEN
    • 8.4.4.3. RPC runtime configuration
    • 8.4.4.4. RPC runtime communication
      • 8.4.4.4.1. Portable End Node (PEN)
  • 8.4.5. Portable End Node (PEN)
    • 8.4.5.1. PEN protocol requirements
    • 8.4.5.2. PEN setup
      • 8.4.5.2.1. Inclusion process
    • 8.4.5.3. PEN Runtime configuration
    • 8.4.5.4. PEN Runtime communication
  • 8.4.6. Always On End Node (AOEN)
    • 8.4.6.1. AOEN protocol requirements
    • 8.4.6.2. AOEN setup
      • 8.4.6.2.1. Inclusion process
    • 8.4.6.3. AOEN runtime configuration
    • 8.4.6.4. AOEN runtime communication
  • 8.4.7. Reporting Sleeping End Node (RSEN)
    • 8.4.7.1. RSEN protocol requirements
    • 8.4.7.2. RSEN setup
      • 8.4.7.2.1. Inclusion process
      • 8.4.7.2.2. RSEN runtime configuration
      • 8.4.7.2.3. RSEN runtime communication
  • 8.4.8. Listening Sleeping End Node (LSEN)
    • 8.4.8.1. LSEN Protocol Requirements
    • 8.4.8.2. LSEN Setup
      • 8.4.8.2.1. Inclusion Process
    • 8.4.8.3. LSEN Runtime Configuration
    • 8.4.8.4. LSEN Runtime Communication
  • 8.4.9. Network Aware End Node (NAEN)
    • 8.4.9.1. NAEN Protocol Requirements
    • 8.4.9.2. NAEN Setup
      • 8.4.9.2.1. Inclusion process
    • 8.4.9.3. NAEN Runtime Configuration
    • 8.4.9.4. NAEN Runtime communication
  • 8.4.10. Wake On Event End Node (WOEEN)
    • 8.4.10.1. WOEEN Protocol Requirements
    • 8.4.10.2. WOEEN Setup
      • 8.4.10.2.1. Mode Selection
    • 8.4.10.3. WOEEN Runtime Configuration
    • 8.4.10.4. WOEEN Runtime Communication