3.2. Management Command Class Definitions

The following subchapters contain definitions of Management Command Classes.

Table of Contents

• 3.2.1. Application Capability Command Class, version 1
  • 3.2.1.1. Not Supported Command Class Command
• 3.2.2. Application Status Command Class, version 1
  • 3.2.2.1. Compatibility Considerations
    • 3.2.2.1.1. Node Information Frame (NIF)
  • 3.2.2.2. Application Busy Command
  • 3.2.2.3. Application Rejected Request Command
• 3.2.3. Association Command Class, version 1
  • 3.2.3.1. Compatibility Considerations
  • 3.2.3.2. Z-Wave Plus Considerations
  • 3.2.3.3. Security Considerations
  • 3.2.3.4. Association Set Command
  • 3.2.3.5. Association Get Command
  • 3.2.3.6. Association Report Command
  • 3.2.3.7. Association Remove Command
  • 3.2.3.8. Association Supported Groupings Get Command
  • 3.2.3.9. Association Supported Groupings Report Command
• 3.2.4. Association Command Class, version 2
  • 3.2.4.1. Compatibility Considerations
  • 3.2.4.2. Z-Wave Plus Considerations
  • 3.2.4.3. Security Considerations
  • 3.2.4.4. Association Remove Command
  • 3.2.4.5. Association Specific Group Get Command
  • 3.2.4.6. Association Specific Group Report Command
• 3.2.5. Association Command Class, version 3
  • 3.2.5.1. Compatibility Considerations
  • 3.2.5.2. Interoperability Considerations
• 3.2.6. Association Command Class, version 4
  • 3.2.6.1. Compatibility Considerations
  • 3.2.6.2. Interoperability Considerations
• 3.2.7. Association Command Configuration Command Class, version 1
  • 3.2.7.1. Command Records Supported Get Command
  • 3.2.7.2. Command Records Supported Report Command
  • 3.2.7.3. Command Configuration Set Command
  • 3.2.7.4. Command Configuration Get Command
  • 3.2.7.5. Command Configuration Report Command
• 3.2.8. Association Group Information (AGI) Command Class, version 1
  • 3.2.8.1. Compatibility considerations
    • 3.2.8.1.1. Multi Channel considerations
  • 3.2.8.2. Association Principles
  • 3.2.8.3. The Association Group Information
    • 3.2.8.3.1. Group identifier
    • 3.2.8.3.2. Profile
      • 3.2.8.3.2.1. General profiles
      • 3.2.8.3.2.2. Control profiles
      • 3.2.8.3.2.3. Sensor profiles
      • 3.2.8.3.2.4. Notification profiles
    • 3.2.8.3.3. Command Class and Command
    • 3.2.8.3.4. Association group name
  • 3.2.8.4. Association Group Name Get
  • 3.2.8.5. Association Group Name Report
  • 3.2.8.6. Association Group Info Get
  • 3.2.8.7. Association Group Info Report
  • 3.2.8.8. Association Group Command List Get
  • 3.2.8.9. Association Group Command List Report
• 3.2.9. Association Group Information (AGI) Command Class, version 2
  • 3.2.9.1. Compatibility considerations
  • 3.2.9.2. The Association Group Information
    • 3.2.9.2.1. Profile
      • 3.2.9.2.1.1. Meter profiles
• 3.2.10. Association Group Information (AGI) Command Class, version 3
  • 3.2.10.1. Compatibility considerations
  • 3.2.10.2. The Association Group Information
    • 3.2.10.2.1. Profile
      • 3.2.10.2.1.1. Irrigation Profiles
• 3.2.11. Battery Command Class, version 1
  • 3.2.11.1. Battery Get Command
  • 3.2.11.2. Battery Report Command
• 3.2.12. Battery Command Class, version 2
  • 3.2.12.1. Compatibility Considerations
  • 3.2.12.2. Battery Get Command
  • 3.2.12.3. Battery Report Command
  • 3.2.12.4. Battery Health Get Command
  • 3.2.12.5. Battery Health Report Command
• 3.2.13. Battery Command Class, version 3
  • 3.2.13.1. Battery Report Command
• 3.2.14. Device Reset Locally Command Class, version 1
  • 3.2.14.1. Device Reset Locally Notification Command
• 3.2.15. Firmware Update Meta Data Command Class, version 1
  • 3.2.15.1. Firmware Meta Data Get Command
  • 3.2.15.2. Firmware Meta Data Report Command
  • 3.2.15.3. Firmware Update Meta Data Request Get Command
  • 3.2.15.4. Firmware Update Meta Data Request Report Command
  • 3.2.15.5. Firmware Update Meta Data Get Command
  • 3.2.15.6. Firmware Update Meta Data Report Command
  • 3.2.15.7. Firmware Update Meta Data Status Report Command
  • 3.2.15.8. Examples
• 3.2.16. Firmware Update Meta Data Command Class, version 2
  • 3.2.16.1. Compatibility considerations
  • 3.2.16.2. Interoperability considerations
    • 3.2.16.2.1. Interoperability with v1 devices
    • 3.2.16.2.2. Checksum calculation
  • 3.2.16.3. Firmware Update Meta Data Report Command
• 3.2.17. Firmware Update Meta Data Command Class, version 3
  • 3.2.17.1. Compatibility considerations
    • 3.2.17.1.1. New fields and values
  • 3.2.17.2. Interoperability considerations
    • 3.2.17.2.1. Interoperability with v1 devices
    • 3.2.17.2.2. Checksum calculation
  • 3.2.17.3. Firmware Meta Data Report Command
  • 3.2.17.4. Firmware Update Meta Data Request Get Command
  • 3.2.17.5. Firmware Update Meta Data Request Report Command
  • 3.2.17.6. Firmware Update Meta Data Get Command
  • 3.2.17.7. Firmware Update Meta Data Report Command
  • 3.2.17.8. Firmware Update Meta Data Status Report Command
• 3.2.18. Firmware Update Meta Data Command Class, version 4
  • 3.2.18.1. Compatibility considerations
    • 3.2.18.1.1. New commands, fields and values
  • 3.2.18.2. Interoperability considerations
    • 3.2.18.2.1. Interoperability with v1 devices
    • 3.2.18.2.2. Checksum calculation
  • 3.2.18.3. Firmware Update Meta Data Request Get Command
  • 3.2.18.4. Firmware Update Meta Data Status Report Command
  • 3.2.18.5. Firmware Update Activation Set Command
  • 3.2.18.6. Firmware Update Activation Status Report
• 3.2.19. Firmware Update Meta Data Command Class, version 5
  • 3.2.19.1. Compatibility considerations
    • 3.2.19.1.1. New commands, fields and values
  • 3.2.19.2. Interoperability Considerations
    • 3.2.19.2.1. Interoperability with v1 devices
    • 3.2.19.2.2. Checksum calculation
  • 3.2.19.3. Firmware Meta Data Report Command
  • 3.2.19.4. Firmware Update Meta Data Request Get Command
  • 3.2.19.5. Firmware Update Meta Data Request Report Command
  • 3.2.19.6. Firmware Update Meta Data Status Report Command
  • 3.2.19.7. Firmware Update Activation Set Command
  • 3.2.19.8. Firmware Update Activation Status Report Command
  • 3.2.19.9. Firmware Update Meta Data Prepare Get Command
  • 3.2.19.10. Firmware Update Meta Data Prepare Report Command
  • 3.2.19.11. Examples
    • 3.2.19.11.1. Identifying firmware revisions
    • 3.2.19.11.2. Firmware download
• 3.2.20. Firmware Update Meta Data Command Class, version 6
  • 3.2.20.1. Compatibility considerations
  • 3.2.20.2. Firmware Meta Data Report Command
  • 3.2.20.3. Firmware Update Meta Data Request Report Command
• 3.2.21. Firmware Update Meta Data Command Class, version 7
  • 3.2.21.1. Compatibility considerations
  • 3.2.21.2. Firmware Meta Data Report Command
  • 3.2.21.3. Firmware Update Meta Data Request Get Command
• 3.2.22. Firmware Update Meta Data Command Class, version 8
  • 3.2.22.1. Compatibility Considerations
  • 3.2.22.2. Interoperability Considerations
    • 3.2.22.2.1. Interoperability with v1 devices
    • 3.2.22.2.2. Checksum calculation
    • 3.2.22.2.3. Firmware Activation
  • 3.2.22.3. Firmware Data fields
    • 3.2.22.3.1. Manufacturer ID (16 bits)
    • 3.2.22.3.2. Firmware ID (16 bits)
    • 3.2.22.3.3. Firmware Checksum (16 bits)
    • 3.2.22.3.4. Firmware target (8 bits)
    • 3.2.22.3.5. Hardware Version (8 bits)
  • 3.2.22.4. Firmware Meta Data Get Command
  • 3.2.22.5. Firmware Meta Data Report Command
  • 3.2.22.6. Firmware Update Meta Data Request Get Command
  • 3.2.22.7. Firmware Update Meta Data Request Report Command
  • 3.2.22.8. Firmware Update Meta Data Get Command
  • 3.2.22.9. Firmware Update Meta Data Report Command
  • 3.2.22.10. Firmware Update Meta Data Status Report Command
  • 3.2.22.11. Firmware Update Activation Set Command
  • 3.2.22.12. Firmware Update Activation Status Report Command
  • 3.2.22.13. Firmware Update Meta Data Prepare Get Command
  • 3.2.22.14. Firmware Update Meta Data Prepare Report Command
  • 3.2.22.15. Firmware Update Examples and frame flows
    • 3.2.22.15.1. Requesting Firmware information
    • 3.2.22.15.2. Performing a Firmware update
    • 3.2.22.15.3. Identifying Firmware revisions
    • 3.2.22.15.4. Firmware Activation
    • 3.2.22.15.5. Firmware download
    • 3.2.22.15.6. Firmware Resume
    • 3.2.22.15.7. Non-secure Firmware update
    • 3.2.22.15.8. Rejecting firmware updates or downloads
• 3.2.23. Grouping Name Command Class, version 1
  • 3.2.23.1. Grouping Name Set Command
  • 3.2.23.2. Grouping Name Get Command
  • 3.2.23.3. Group Name Report Command
• 3.2.24. Hail Command Class, version 1
  • 3.2.24.1. Hail Command
• 3.2.25. Indicator Command Class, version 1
  • 3.2.25.1. Interoperability considerations
  • 3.2.25.2. Indicator Set Command
  • 3.2.25.3. Indicator Get Command
  • 3.2.25.4. Indicator Report Command
• 3.2.26. Indicator Command Class, version 2
  • 3.2.26.1. Compatibility Considerations
  • 3.2.26.2. Interoperability considerations
  • 3.2.26.3. Indicator Set Command
  • 3.2.26.4. Indicator Get Command
  • 3.2.26.5. Indicator Report Command
  • 3.2.26.6. Indicator Supported Get Command
  • 3.2.26.7. Indicator Supported Report Command
• 3.2.27. Indicator Command Class, version 3
  • 3.2.27.1. Compatibility Considerations
• 3.2.28. Indicator Command Class, version 4
  • 3.2.28.1. Compatibility Considerations
  • 3.2.28.2. Indicator Description Get Command
  • 3.2.28.3. Indicator Description Report Command
• 3.2.29. IP Association Command Class, version 1
  • 3.2.29.1. Compatibility considerations
  • 3.2.29.2. Terminology
  • 3.2.29.3. Z-Wave Multi Channel compatibility considerations
  • 3.2.29.4. Advertising the IP Association Command Class
  • 3.2.29.5. IP Association Set Command
  • 3.2.29.6. IP Association Get Command
  • 3.2.29.7. IP Association Report Command
  • 3.2.29.8. IP Association Remove Command
• 3.2.30. Manufacturer Specific Command Class, version 1
  • 3.2.30.1. Security Considerations
  • 3.2.30.2. Manufacturer Specific Get Command
  • 3.2.30.3. Manufacturer Specific Report Command
• 3.2.31. Manufacturer Specific Command Class, version 2
  • 3.2.31.1. Security Considerations
  • 3.2.31.2. Device Specific Get Command
  • 3.2.31.3. Device Specific Report Command
• 3.2.32. Multi Instance Association Command Class, version 1
• 3.2.33. Multi Channel Association Command Class, version 2
  • 3.2.33.1. Compatibility Considerations
  • 3.2.33.2. Z-Wave Plus Considerations
  • 3.2.33.3. Security Considerations
  • 3.2.33.4. Multi Channel Association Set Command
  • 3.2.33.5. Multi Channel Association Get Command
  • 3.2.33.6. Multi Channel Association Report Command
  • 3.2.33.7. Multi Channel Association Remove Command
    • 3.2.33.7.1. Examples
  • 3.2.33.8. Multi Channel Association Supported Groupings Get Command
  • 3.2.33.9. Multi Channel Association Supported Groupings Report Command
• 3.2.34. Multi Channel Association Command Class, version 3
  • 3.2.34.1. Compatibility Considerations
  • 3.2.34.2. Z-Wave Plus Considerations
  • 3.2.34.3. Security Considerations
  • 3.2.34.4. Multi Channel Association Set Command
• 3.2.35. Multi Channel Association Command Class, version 4
  • 3.2.35.1. Compatibility Considerations
  • 3.2.35.2. Interoperability Considerations
• 3.2.36. Multi Channel Association Command Class, version 5
  • 3.2.36.1. Compatibility Considerations
  • 3.2.36.2. Interoperability Considerations
• 3.2.37. Node Naming and Location Command Class, version 1
  • 3.2.37.1. Node Name Set Command
  • 3.2.37.2. Node Name Get Command
  • 3.2.37.3. Node Name Report Command
  • 3.2.37.4. Node Location Set Command
  • 3.2.37.5. Node Location Get Command
  • 3.2.37.6. Node Location Report Command
• 3.2.38. Remote Association Activation Command Class, version 1
  • 3.2.38.1. Remote Association Activate Command
• 3.2.39. Remote Association Configuration Command Class, version 1
  • 3.2.39.1. Remote Association Configuration Set Command
  • 3.2.39.2. Remote Association Configuration Get Command
  • 3.2.39.3. Remote Association Configuration Report Command
• 3.2.40. Time Command Class, version 1
  • 3.2.40.1. Compatibility considerations
    • 3.2.40.1.1. Node Information Frame (NIF)
  • 3.2.40.2. Interoperability considerations
  • 3.2.40.3. Time Get Command
  • 3.2.40.4. Time Report Command
  • 3.2.40.5. Date Get Command
  • 3.2.40.6. Date Report Command
• 3.2.41. Time Command Class, version 2
  • 3.2.41.1. Compatibility considerations
    • 3.2.41.1.1. Node Information Frame (NIF)
  • 3.2.41.2. Interoperability considerations
  • 3.2.41.3. Time Offset Get Command
  • 3.2.41.4. Time Offset Set Command
  • 3.2.41.5. Time Offset Report Command
• 3.2.42. Time Command Class, version 3
  • 3.2.42.1. Compatibility Considerations
    • 3.2.42.1.1. Node Information Frame (NIF)
  • 3.2.42.2. Interoperability Considerations
  • 3.2.42.3. Security Considerations
  • 3.2.42.4. Time Report Command
  • 3.2.42.5. Time Set Command
  • 3.2.42.6. Date Set Command
• 3.2.43. Time Parameters Command Class, version 1
  • 3.2.43.1. Time Parameters Set Command
  • 3.2.43.2. Time Parameters Get Command
  • 3.2.43.3. Time Parameters Report Command
• 3.2.44. Version Command Class, version 1
  • 3.2.44.1. Compatibility Considerations
  • 3.2.44.2. Security Considerations
  • 3.2.44.3. Version Get Command
  • 3.2.44.4. Version Report Command
  • 3.2.44.5. Version Command Class Get Command
  • 3.2.44.6. Version Command Class Report Command
• 3.2.45. Version Command Class, version 2
  • 3.2.45.1. Version Report Command
• 3.2.46. Version Command Class, version 3
  • 3.2.46.1. Compatibility considerations
  • 3.2.46.2. Version Capabilities Get Command
  • 3.2.46.3. Version Capabilities Report Command
  • 3.2.46.4. Version Z-Wave Software Get Command
  • 3.2.46.5. Version Z-Wave Software Report Command
    • 3.2.46.5.1. Version fields
• 3.2.47. Version Command Class, version 4
  • 3.2.47.1. Compatibility Considerations
  • 3.2.47.2. Terminology
    • 3.2.47.2.1. Migration
    • 3.2.47.2.2. Operation
  • 3.2.47.3. Version Capabilities Report Command
  • 3.2.47.4. Version Migration Capabilities Get Command
  • 3.2.47.5. Version Migration Capabilities Report Command
  • 3.2.47.6. Version Migration Set Command
  • 3.2.47.7. Version Migration Get Command
  • 3.2.47.8. Version Migration Report Command
• 3.2.48. Wake Up Command Class, version 1
  • 3.2.48.1. Terminology
  • 3.2.48.2. Interoperability considerations
  • 3.2.48.3. Wake Up Interval Set Command
  • 3.2.48.4. Wake Up Interval Get Command
  • 3.2.48.5. Wake Up Interval Report Command
  • 3.2.48.6. Wake Up Notification Command
  • 3.2.48.7. Wake Up No More Information Command
• 3.2.49. Wake Up Command Class, version 2
  • 3.2.49.1. Compatibility considerations
  • 3.2.49.2. Wake Up Interval Set Command
  • 3.2.49.3. Wake Up Interval Capabilities Get Command
  • 3.2.49.4. Wake Up Interval Capabilities Report Command
• 3.2.50. Wake Up Command Class, version 3
  • 3.2.50.1. Wake Up Interval Capabilities Report Command
    • 3.2.50.1.1. Wake Up On Demand functionality
• 3.2.51. Z/IP Naming and Location Command Class, version 1
  • 3.2.51.1. Compatibility Considerations
  • 3.2.51.2. Z/IP Name Set Command
  • 3.2.51.3. Z/IP Name Get Command
  • 3.2.51.4. Z/IP Name Report Command
  • 3.2.51.5. Z/IP Location Set Command
  • 3.2.51.6. Z/IP Location Get Command
  • 3.2.51.7. Z/IP Location Report Command
• 3.2.52. Z-Wave Plus Info Command Class, version 1
• 3.2.53. Z-Wave Plus Info Command Class, version 2
  • 3.2.53.1. Compatibility Considerations
    • 3.2.53.1.1. Node Information Frame (NIF)
  • 3.2.53.2. Multi Channel considerations
  • 3.2.53.3. Z-Wave Plus Info Get Command
  • 3.2.53.4. Z-Wave Plus Info Report Command